cold drawn seamless steel tube
"
Круглый масштаб окиси безшовных труб легированной стали свободный поверхностный размер 6 до 88mm OD
Product Name: SAE4130 ASTM A519 Seamless Cold Drawn Round Steel Tubing Free of Oxide Scale Surface Material:1010, 1020, 4130 Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Delivery Condition: CW, SR, A, N Application: For mechanical application Round steel tubing exhibits excellent strength and durability, is easy to cut, bend, and form, and is versatile and affordable enough for a broad spectrum of applications. Multiple styles and alloys are available,
DOM ASTM A513 Type5 вокруг стального Tuing
Product Name: DOM Round Steel Tube Drawn Over a Mandrel ASTM A513 Type5 for Stressful Application Size(mm): O. D.: 6.0-168.0 W. T.: 1.0-15.0mm L: Max 12000mm DOM mechanical tubing is manufactured to ASTM Specification A513 This product has tensile properties that are comparable to cold-drawn seamless steel tubing of the same steel analysis and nominal size. In addition, the DOM tubing has superior concentricity and a high degree of uniformity in wall thickness. DOM Steel
6 - трубопровод 168mm OD Weldable стальной, сброшенный стресс обжег трубку толстой стены стальную
Product Name: Carbon Steel Welded Tube Type 5 DOM Tube ASTM A513 / ASME SA513 Stress Relieved Annealed Size(mm): O. D.: 6.0-168.0 W. T.: 1.0-15.0mm L: Max 12000mm DOM mechanical tubing is manufactured to ASTM Specification A513 This product has tensile properties that are comparable to cold-drawn seamless steel tubing of the same steel analysis and nominal size. In addition, the DOM tubing has superior concentricity and a high degree of uniformity in wall thickness. DOM Steel
Труба ВЕСА P91 ASTM A213 теплообменного аппарата 15mm структурная стальная
ASTM A213 P9/P22/P91 Seamless Alloy Steel Boiler Tube Saemless Alloy Boiler Steel Tubes Standard: ASTM/ASME A213, A334, A335, etc. Grade: T1, T1a, T2, T5, T9, T11, T12, T17, T21, T22, T23, T24, T36, T122, P12, P5, P91, 15Mo3, 12CrMo, 15CrMoG, 1Cr5Mo, 27SiMn, 09Cr2AlMoRe, 09CrMoAl, 13CrMo44, 10CrMo9-10, 09CrCuSb, 09MnNiD, 09MnD, 09CuPCrNi, 07Cr2AlMo, etc. Product Name Seamless Cold Drawn Alloy Steel Tube ASTM A213 Material T9 T11 T12 T91 T92 P9 P22 P91 Standard ASTM A213
Трубы легированной стали нефти уточняя безшовные длина 6000mm до 12000mm
GOST550-75 10Г2 15Х5М 15X5 10Mn2 25x2 20x2 25x2.5 Alloy Steel tubes steel pipes for Petroleum refining tubes Application:seamless steel tubes for petroleum refining tubes application Normal sizes:25x2.5mm 25x2mm 20x2mm Механические свойства 10Г2 15Х5М 15X5 марка стали Steel grade Времен. сопрот., Tensile Н/мм2 Предел текуч., Yield Н/мм2 Относит. удлин., Elongation % Относит. сужение, reduction % Ударная вязкость Impact KCU, Дж/см2 Твердость по Бринеллю, Hardness НВ, не более
Прямота изготовленного на заказ материала 4130/30CrMo трубы легированной стали длины низкого высокая
Product Name: 4130 / 30CrMo Seamless Cold Drawn Alloy Steel Pipe , Seamless Mechanical Tubing Material:1010, 1020, 1045, 4130, 4140 Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Delivery Condition: CW, SR, A, N Application: For mechanical application Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing or Cold Rolling, On line inspection 5
Жидкая безшовная трубка холоднотянутой стали модель 20# ГОСТ (ГОСУДАРСТВЕННЫЙ СТАНДАРТ) 8734 размера 6 до 114mm OD
GOST8734 20# Annealed Seamless Steel Tube for General Purpose Economic Round Tube Material: 10, 20, 35, 45, 10Mn2, 15Cr5Mo, 12Cr8, 20Cr, 40Cr Size Range: OD: 6-114mm, WT: 1-20mm, Length: 5.8m/6m, maximal 11.8m Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing or Cold Rolling, On line inspection 5. Heat Treatment 6. Straightening/Cutting to specified length
Котельная труба конденсатора безшовная размер модель A179/SA179 ASTM 3,2 до 76.2mm OD
1. Product Name: ASTM A179 / SA179 Cold Drawn Seamless Carbon Heat Exchanger and Condenser Steel Tube 2. Size Range: OD: 3.2-76.2mm, WT: 1-10mm, Length: 5.8m/6m, maximal 11.8m 3. Stable Quality with Comeptitive Price 4. High Preformance and Longer Working Life Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing or Cold Rolling, On line inspection 5. Heat
Холоднопрокатная сваривая отполированная округлая форма трубы нержавеющей стали для автомобильной промышленности
Cold Rolled Welding polished Stainless Steel Tubing , Round Seamless Stainless Steel Pipe 201 304L 316L Product Name Cold Rolled Welding Stainless Steel Tube Round Seamless Stainless Steel Pipe (201,202,304,304L,309,309S,310,316,316L,321,347,409,410,416) Material Stainless Steel Shape Round, Square, Rectangular, Oval, Hexagonal Grade 200 Series:201/202 300 Series:301/302/303/304/304 L/304 N/309/309 S/310/316/316 L/321/347 400 Series: 403/408/409/410/416/420/430/431/440/440A
